Printable WiFi Sign Templates
The code is always the same — the difference is where you put it and how you print it. Pick a placement below, generate your network code on the free tool, export as PNG or SVG, and print at the size shown. No account, no watermark, nothing uploaded to a server.
- No signup
- PNG & SVG export
- Print guide included
A 4 cm code on an A5 tent card. Guests scan once, join, done — nobody reads the password out loud.
The single highest-value placement in hospitality. Print one per room, swap on password rotation.
For places where customers arrive before they are seated. Keep a clear quiet-zone margin around the code.
Angled slightly toward the seat. 3–4 cm code minimum so it scans at arm length without zooming.
Small code for private desks. Print on matte label stock — glossy glare breaks scanning.
One code for the whole room. Put it at eye level; phone cameras read it from 2–3 meters at this size.
Seen before ordering, scanned while waiting. Avoid placing against sunlight — reflections kill scans.
Under glass works fine if the print is crisp and the glass is clean. 4 cm code, dark on white.
Small inserts need the smallest 3 cm code and the highest contrast. Test one print before bulk.
Polite signal: one card, no asking for the password mid-conversation. Same scan behavior everywhere.
Laminating is fine — keep the code surface dry and free of finger smudges where it hangs.
Two copies: one at the entrance, one near where guests charge phones. Rotate password between bookings.
How to print a WiFi sign that actually scans
Generate the code
Open the password card generator, type the network name and password, choose the security type, then export PNG or SVG.
Pick the right size
4 cm square for table cards and counter tents; 6–8 cm for posters; 3 cm only for crisp, high-contrast inserts. When in doubt, bigger scans better.
Keep contrast and margins
Dark modules on a white background, with at least one quiet-zone margin equal to 4 modules around the code. Matte stock beats glossy for scanning.
Test before printing in bulk
Scan one print with a phone from the distance your guests will use. If it fails, re-export at a larger size or re-print on matte stock.
One honest warning
The password travels inside the code as plain text. Anyone who can photograph the printed sign can read the password, so use a separate guest network and rotate the password when guests leave — never your main network. The tool stays fully static: it draws the code in your browser and nothing is uploaded anywhere.
If you reissue the password often, a dynamic redirect service is the honest fit — this site does not offer that, and thestatic vs dynamic comparison spells out the difference.
Template sample: the code this page produces
What it encodes: https://mywifiqr.com/templates/
Point a phone camera at it to confirm it opens. Change the fields in the generator above and the result changes with them — the code shown here is only a sample.